. PartsWanted
. PartsWanted
WANTED
Rubber window moulding for side windowsfor my VL100. Need enough
for all eight side windows as they all leak or Information onwhere to find
moulding would also be appreciated.
Dan Valles (FOI459)
WANTED & FOR SALE
I have a Starliner- 1957-- powered by a White Mustang and aClark transmission.. I need a drive shaft (the two pieces) andthe ring and pinion gears and housing or a complete rear end...Also I have a radiator for a 1948 Fexible.. for sale
Stanley Shain
585 State Road
Dartmouth, MA 02747
508-878-3565
WANTED
Parts needed for 1998MCI DL3
2 main wire harness
Top Cap for the back of bus
Both engine doors
Right and left flange panels
Flange rear door
Service door for left side of bus
Rear bumper
If any of the requested parts areavailable or if you have any questions, please contact LearnceHill at (713) 944-2287.
Thank you!!!!!
WANTED
Has anyone the following items to fit a 1948Flxible Clipper?:
Baggage compartment "quarter window" louvered vents(both sides); stainless steel side trim with cats-eye reflectorsjust aft of baggage compartment door; a pair (left & right)of original (slider) coach windows; the round decklid license/stoplight assembly. Could also use the sheetmetal in which the leftbaggage compartment vent is mounted, the right baggage compartmentdoor, and virtually any piece of stainless side trim, as theseare marginal on my bus. Any help obtaining these items will begreatly appreciated.
Please contact:
Patrick Lorang, (FOI# 422)2628 Ellis Street,WANTED
Howdy!
I've got a 46' Clipper that I am restoring, and I'm looking forthe availability of the curved, "ARROW" type tail lites(turn signals). I would like new, original complete lights withthe housing, and lenses. Thanks.
Stuart Hanley FOI #331
pqandstu@bellsouth.net
Phone 954-922-3224
WANTED
I am looking to buy WHITE, MACK, DIAMONDT, AUTOCAR and other trucks with integral sleeper cabs. I willconsider all other makes and models including day cabs. I preferto buy easily restored, complete vehicles but I will considerany condition, including just sleeper cabs and / or related parts.I also am interested in antique road graders that are draw bar"pull-type", antique equipment, antique motorcycles,antique airplanes, military trucks, or ???
MICHAEL MORAN
FOI member #335
P.O. BOX 130398
CORAM, MT 59913
(406) 387-4177
E-mail mtpropcn@cyberport.net
Check out my GMSenicruisers FOR SALE
WANTED
I desparately need a repair manual(electrical) for my 1960 Flxible Hi-Level
bus. I've already done a lot of research trying to find something,but I keep
running into a dead end. Any help in locating this informationwill be
extremely appreciated.
Sincerely, Scott Martin (FOI 420)
2635 Arkansas ave
Norfolk, VA. 23513
WANTED
I need STOP and TURN lenses for my '53 visicoach. They canbe NOS or used. I
need both sides front and rear. Would love to drive the coachto"Quartzite"
but don't have time or desire to convert to different type oflight.
Thomas Monaghan FOI (404)
5972 Van Kepple Rd.
Forestville Ca. 95436
707-887-2750
707-319-1991
1-800-795-1314 {weekday eveningsafter 6:30 pm]
Wanted for 1948 Flxible Clipper: original speedometer and sendingunit, water temperature gauge, fuel gauge and instrument clusterdash panel. Also could use a spare dash switch panel and arrayof good switches
(mine work but are rusty).
Contact: Patrick Lorang, 2628 Ellis Street, Bellingham, WA98225,
(360) 733-2412,or e-mail at: palorang@telcomplus.net